Pierced Bird Window

This lit­tle cop­per piece is wait­ing for a home.

It’s about 2.5 inch­es square. The back­ground and fig­ure win­dow are cop­per. The tube riv­ets and spac­ers are brass.

3D pierced bird
3D pierced bird

The back­ground pat­tern was print­ed onto the cop­per using a com­mer­cial pat­tern sheet with the rolling mill. The bird fig­ure is a sim­pli­fied out­line tak­en from a Dutch tile that I found in a book.

The pierced piece floats over the background.

about 1/4 inch between the layers
about 14 inch between the layers

There is about 14 inch between the plates.

tube rivets with spacers
tube riv­ets with spacers

From the back you can see the hol­low rivets.

showing the rivets from the back
show­ing the riv­ets from the back

I sus­pect that this piece will end up as part of some­thing larg­er. Per­haps a box.

Mean­while it’s liv­ing on the design wall.

bird window waiting for further inspiration
bird win­dow wait­ing for fur­ther inspiration

About the Author

Lara Harriger